After cutting the side guide profiles I am asked to "staple" the brushes. Why? Is it important to do it?

The cut is explained at point 3 in the mounting instructions: side guides (when the insect screen rolls up vertically); superior and inerior guides (when the insect screen rolls up horizontally with high bottom truck); superior guide (when the insect screen rolls up horizontally with low bottom truck). After cutting the aluminium profiles, it is required to " staple /crush" the brushes. It is an important and necessary point for the proper functioning of the insect screen. In fact, by stapling/crushing brushes and aluminium, brushes immediately get locked and don’t interfere with the locking mechanisms of the insect screen, which suffers the effect of vibrations over time.

What should I do if i have orderered a customize insect screen and, therefore, its size is exactly the same as that of the window opening?

Vertical Roll-Up Insect Screen. As shown at point 1 in the assembly instructions, the insect screen is supplied pre-cut to the size indicated on the label. No cutting is required to be done, the only thing you’re required to do is the assembly of the plastical elements. Horizontal Roll-Up Insect Screen with High Bottom Truck. As shown at point 1 in the assembly instructions, the insec t screen is supplied pre-cut to the size indicated on the label. Bar and handle reduction has always to be done as sh ow n at point 2b of the instructions. Lastly, only the assembly of the pastic elements needs to be done. Horizontal Roll-up Insect Screen with Low Bottom Truck. As shown at point 1 in the assembly instructions, the insect screen is supplied pre-cut to the size indicated on the label. Bar and handle reduction has always to be done as sho w n at point 2b of the instructions. Lastly, only the assembly of the pastic elements needs to be done.

How to properly cut the dumpster?

Vertical Roll-Up Insect Screen How to cut a dumpster is properly explained at point 2 in the assembly instructions. In order to calculate the position where the cut needs to be done, it will be necessary to consider the width of the door/window opening and subtract 1,5 cm to this width. (Example: if the width of the window opening is 95 cm, you will cut to 93.5 cm (95-1.5). In order to make the cut, it will be necessary to measure from the outside of the cap A (already assembled) and cut at the proper point. The thickness of cap A is already considered within the measurement. The cut ting side is always indicated by cap B, which is identified by the writing “cutting side”. Before cutting, make always sure that the aluminium profiles are perfectly aligned. Horizontal Roll-Up Insect Screen with High Bottom Truck How to cut a dumpster is explained at point 2 in the assembly instructions. In order to calculate the position where to make the cut, it will be necessary to consider the window/door opening heigt (H) and subtract 1,5 cm to this height. Example: if the window opening height measures 230 cm, you will cut to 228,5 cm (230-1,5). In order to make the cut it will be necessary to measure from the outside of cap A (already assembled) and cut at the proper point. The thickness of cap A is already considered within the measurement. The cutting side is always indicated by cap B, which is identified by the writing “cutting side”. Before cutting, make always sure that the aluminium profiles are perfectly aligned. The handle/bar profile should then be shortened (instructions at point 2b). Horizontal Roll-Up Insect Screen with Low Bottom Truck How to cut a dumpster is explained at point 2 in the assembly instructions. In order to calculate the position where to make the cut, it will be necessary to consider the window/door opening heigt (H) and subtract 1,5 cm to this height. Example: if the window opening height measures 230 cm, you will cut to 228,5 cm (230-1,5). In order to make the cut it will be necessary to measure from the outside of cap A (already assembled) and cut at the proper point. The thickness of cap A is already considered within the measurement. The cutting side is always indicated by cap B, which is identified by the writing “cutting side”. Before cutting, make always sure that the aluminium profiles are perfectly aligned. The handle/bar profile should then be shortened (instructions at point 2b).

Based on what is written, the vertical roll-up insect screen has a minimum width of 66 cm. I need a vertical roll-up insect screen with a width of less than 66 cm. What can I do? Is it possible to fulfill this request?

Of course . It is also possible to adapt our vertical roll-up insect screen kit for widths that are less than 66 cm. There is a particular instruction which “rules” this choice.

I would like to buy your insect screen but I am not sure about the dimensions of its elements, especially when it comes to depth. I do not know whether there is the space needed to assembly the insect screen or not and whether it will be properly functioning after the installation of it or not. What can I do?

The producer is the first one to provide all the information regarding the dimensions of the following insect screens: vertical roll-up; horizontal roll-up with high bottom truck; horizontal roll-up with low bottom truck. In this way the costumer can decide whether it is possible or not to assembly the insect screen he wants to buy and be sure of its functionality. The dimensions of the insect screen are stated as follows:

I have just finished assembling my new insect screen in the window/door opening but when it comes to locking the handle/bar on the closing guide elements, I notice that it does not lock properly. Why?

Most of the times, when you cannot lock the handle/bar with the closing guide caps it is because the caps are reversed. The caps define the closing mechanism. The locking of the insect screen is characterized by the locking and interlocking of the cap placed at the very end of the handle/bar together with the closing cap guide. Therefore most of the times when the locking mechanism fails is because: Right cap is reversed with left cap of the handle/bar. T he assembly instructions show the assembling of the plastic accessories on the handle/bar. Vertical Roll-Up Insect Screen Horizontal Roll-Up Insect Screen with High Bottom Truck Reversal of closing right cap with closing left cap. Both for the vertical and for the horizontal roll-up insect screen, th e failure to lock can be caused by the reversal of the closing guide caps. ( base) The curvature of the base is always visible to a person who, standing in the house, looks outside his home. NB: the failure to lock the elements can be also cause d by : a failure to“staple” the brushes, cutting mistakes, mistakes given by the out-of-square window opening.

In the instructions it is written that I can use silicone. When and how can I use it? Is the insect screen safe? Is the performance granted over time?

Vertical and horizontal roll-up insect screen is a safe and long-lasting product . The expansion in height and width by Allen screws is the strong point of this model that allows you to have guarantees on solidity and performance over time and not to ruin the window opening with drill holes and dowels. In the assembly instructions, reference is made to silicone, not to give more solidity to the insect screen, but to go to equalize and level any major defects and irregularities of the window/door. The use of silicone is recommended only after having properly checked the functioning of the insect screen , to avoid having to disassemble the whole frame if there are problems related to the mounting of the structural elements.

In the instructions it is written that the compensation spring (M) is facing up. Why?

In the case of a horizontal roll-up insect screen i n the assembly instructions, it is always written to place de compensation spring (M) upwards. The compensation spring (M) should tend to push the dumpster down in order to properly work. NB . It is important that, in the horizontal roll-up insect screen with raised guide, the Allen screw is tightened only in the upper cap (do not tighten the lower cap screw).

I have bought a horizontal high bottom truck insect screen, how can i make it work properly with the dumpster placed on the right?

The standard functioning of the horizontal high bottom truck insect screen is with the dumpster placed on the left compare to a person, who standing inside, looks outside his home. If, for any reason, that could be convenvience or personal taste, you want to make the horizontal high bottom truck insect screen work, assembling the dumpster on the left there are some structural changes that need to be done, as follows: Rotation of the dumpster of 180° . What was previously the lower cap (spring side) will now be inserted at the top of the box and what was previously the upper cap (brake side) will be inserted at the bottom of the box. As shown in the assembly instructions, the compensation spring (M) has always to be placed upwards on the dumpster, both when the dumpster is on the left or on the right of the insect screen. Exchange of the closing guide caps position . The cap (S), which has its functioning on the left, was closing the inferior guide, having its functioning on the right will be closing the superior guide. Viceversa, the cap (D), which has its functioning on the left was closing the superior guide, having its functioning on the right will be closing the inferior guide.

When there is an “out-of-square” situation, can I assembly the insect screen still?

Expansion insect screens can partially retrieve possible mistakes, which are made while taking measurements or because of “out-of-square” situations. More precisely, vertical roll-up insect screens can retrive about 1,5 cm in width and about 1 cm in height. Horizontal roll-up insect screens with a high or low bottom truck can retrieve about 1 cm in width and about 1 cm in height.

Archivi FAQs - ProYourHome

After cutting the side guide profiles I am asked to “staple” the brushes. Why? Is it important to do it?
The cut is explained at point 3 in the mounting […]

Continue reading
What should I do if i have orderered a customize insect screen and, therefore, its size is exactly the same as that of the window opening?
Vertical Roll-Up Insect Screen. As shown at point 1 in […]

Continue reading
How to properly cut the dumpster?
Vertical Roll-Up Insect Screen How to cut a dumpster is […]

Continue reading
Based on what is written, the vertical roll-up insect screen has a minimum width of 66 cm. I need a vertical roll-up insect screen with a width of less than 66 cm. What can I do? Is it possible to fulfill this request?
Of course. It is also possible to adapt our vertical […]

Continue reading
I would like to buy your insect screen but I am not sure about the dimensions of its elements, especially when it comes to depth. I do not know whether there is the space needed to assembly the insect screen or not and whether it will be properly functioning after the installation of it or not. What can I do?
The producer is the first one to provide all the […]

Continue reading
I have just finished assembling my new insect screen in the window/door opening but when it comes to locking the handle/bar on the closing guide elements, I notice that it does not lock properly. Why?
Most of the times, when you cannot lock the handle/bar […]

Continue reading
In the instructions it is written that I can use silicone. When and how can I use it? Is the insect screen safe? Is the performance granted over time?
Vertical and horizontal roll-up insect screen is a safe and […]

Continue reading
In the instructions it is written that the compensation spring (M) is facing up. Why?
In the case of a horizontal roll-up insect screen in […]

Continue reading
I have bought a horizontal high bottom truck insect screen, how can i make it work properly with the dumpster placed on the right?
The standard functioning of the horizontal high bottom truck insect […]

Continue reading
When there is an “out-of-square” situation, can I assembly the insect screen still?
Expansion insect screens can partially retrieve possible mistakes, which are […]

Continue reading

12 Next